1. High flexibility: High flexibility with the use of Heat gun makes it easier to be applied on the curving
surface. The ultimate in flexibility and conformability to curved surfaces.
2. Application: Can be applied on interior and exterior surfaces of a car bonnet, spoiler,
bumper, car roof, car mirror, interior decoration, even mobile phone and so on
3. Easy apply and remove: We use Strong Quality Imported Self Adhesive Glue, so it
is easy to apply it on the car and will stick to pretty much any surface, but also can be
removed and re-applied numerous times without losing its adhesion.
Easy Install will not fade, chip, crack or peel.
4. Water proof, UV and FR; Filter harmful light ray. Seamless for whole car wrapping.
5. Easy to clean with soap and water.
6. Without residual glue on the car after remove
Film Thickness: 3.6 – 4.1 mil
Adhesive Thickness: 1.6 mil
Total Thickness: Approx. 5.2 – 5.7 mil
Film Type: Hybrid
Release Liner: PET
Protective Liner: PET
Adhesive Type: Low - Medium Tack
Technology: Air Release Technology
Removability: Long-Term
Application Method: Dry Application Only
Recommended Installation Temperature: 70°F – 80°F (24°C – 26.5°C)
Post-Heating Temperature: 175°F – 212°F (79.5°C – 100°C)
Conformability: Suitable for flat surfaces, rivets, simple and compound curves, corrugations, extreme convex and concave areas
Directional Use: Some vinyl films are directional.
Chemical Resistance: Resistant to most mild acids, mild alkalis, and salts
